BACK DOOR OUTSIDE GARNISH REMOVAL


  1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A0040AI

      Using a moulding remover, disengage the clip and claw.

    2. A00409C

      Using a moulding remover, disengage the clip and claw.

    3. A0040K2E01

      Disengage the 3 clips in the order shown in the illustration.

    4. A0043OY

      Disengage the 2 clips by pulling the back door trim board assembly in the direction indicated by the arrows in the illustration.

    5. A0043CXE01
      Text in Illustration
      *1 Back Door Trim Board Assembly
      *2 Back Door Panel
      *a The portion that may be damaged due to interference

      Remove the back door trim board assembly by pulling it in the direction indicated by the arrow in the illustration to disengage the 4 clips.

      Note

      Make sure to pull the back door trim board assembly in the direction indicated by the arrow in the illustration. If the back door trim board assembly is removed from the lower part, the door pull handle mounting area may interfere with the back door panel, resulting in damage to the back door trim board assembly.

  2. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. A0043J3E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the back door outside garnish sub-assembly.

    2. A0040FU

      Remove the 4 nuts.

    3. A0043NN

      Disengage the 11 clips and remove the back door outside garnish sub-assembly.

    4. Remove the 11 clips (back door outside garnish clip) from the back door outside garnish sub-assembly.

    5. Remove the 4 gaskets from the back door outside garnish sub-assembly.

  3. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY


    1. A0041YS

      Remove the back door opener switch assembly.

  4. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM


    1. A0042M1E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage component door emblem.

    2. Using a moulding remover, disengage the 3 claws and pin and remove the luggage component door emblem.

      Note


      • If reusing the emblem, take care not to damage the luggage component door emblem.

      • Be careful not to damage the vehicle body.

  5. REMOVE NO. 3 BACK DOOR NAME PLATE


    1. A0040JPE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 3 back door name plate.

    2. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the No. 3 back door name plate.

      Note


      • If reusing the name plate, take care not to damage the No. 3 back door name plate.

      • Be careful not to damage the vehicle body.

  6. REMOVE NO. 2 BACK DOOR NAME PLATE


    1. A0042L5E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 2 back door name plate.

    2. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the No. 2 back door name plate.

      Note


      • If reusing the name plate, take care not to damage the No. 2 back door name plate.

      • Be careful not to damage the vehicle body.