NAME PLATE INSTALLATION

Tech Tips

When installing new name plates or emblems, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblems excessively.


  1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM


    1. A00422D

      Engage the pin and 3 claws to install the luggage compartment door emblem.

      Note

      Be careful not to damage the vehicle body.

  2. INSTALL NO. 3 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 3 back door name plate (if reusing the No. 3 back door name plate).


      1. Using a heat light, heat the No. 3 back door name plate.

      2. Remove the double-sided tape from the No. 3 back door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 3 back door name plate.

    3. Install the No. 3 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 3 back door name plate.

      2. Remove the release paper from the No. 3 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 back door name plate as shown in the illustration.

        A003ZYRE01
        Text in Illustration
        *1 Location Pin - -

  3. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 2 back door name plate (if reusing the No. 2 back door name plate).


      1. Using a heat light, heat the No. 2 back door name plate.

      2. Remove the double-sided tape from the No. 2 back door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 2 back door name plate.

    3. Install the No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        A004456E01
        Text in Illustration
        *1 Location Pin - -

  4. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the No. 1 back door name plate (if reusing the No. 1 back door name plate).


      1. Using a heat light, heat the No. 1 back door name plate.

      2. Remove the double-sided tape from the No. 1 back door name plate.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the No. 1 back door name plate.

    3. Install the No. 1 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 1 back door name plate.

      2. Remove the release paper from the back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 back door name plate as shown in the illustration.

        A0041ZNE01
        Text in Illustration
        *1 Location Pin - -

  5. INSTALL SIDE PANEL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the side panel emblem (if reusing the side panel emblem).


      1. Using a heat light, heat the side panel emblem.

      2. Remove the double-sided tape from the side panel emblem.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the side panel emblem.

    3. Install the side panel emblem.


      1. Using a heat light, heat the vehicle body and the side panel emblem.

      2. Remove the release paper from the side panel emblem.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the side panel emblem as shown in the illustration.

        A00400HE01
        Text in Illustration
        *1 Location Pin - -

        Tech Tips

        Use the same procedure for the RH side and LH side.