NAME PLATE REMOVAL

Tech Tips

When removing the name plates or emblems, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblems excessively.


  1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM


    1. A0042M1E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage component door emblem.

    2. Using a moulding remover, disengage the 3 claws and pin and remove the luggage component door emblem.

      Note


      • If reusing the emblem, take care not to damage the luggage component door emblem.

      • Be careful not to damage the vehicle body.

  2. REMOVE NO. 3 BACK DOOR NAME PLATE


    1. A0040JPE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 3 back door name plate.

    2. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the No. 3 back door name plate.

      Note


      • If reusing the name plate, take care not to damage the No. 3 back door name plate.

      • Be careful not to damage the vehicle body.

  3. REMOVE NO. 2 BACK DOOR NAME PLATE


    1. A0042L5E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 2 back door name plate.

    2. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the No. 2 back door name plate.

      Note


      • If reusing the name plate, take care not to damage the No. 2 back door name plate.

      • Be careful not to damage the vehicle body.

  4. REMOVE NO. 1 BACK DOOR NAME PLATE


    1. A0041WZE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 1 back door name plate.

    2. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the No. 1 back door name plate.

      Note


      • If reusing the name plate, take care not to damage the No. 1 back door name plate.

      • Be careful not to damage the vehicle body.

  5. REMOVE SIDE PANEL EMBLEM


    1. A00411SE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the side panel emblem.

    2. Using a moulding remover, peel off the double-sided tape and disengage the 2 pins to remove the side panel emblem.

      Note


      • If reusing the emblem, take care not to damage the side panel emblem.

      • Be careful not to damage the vehicle body.

      Tech Tips

      Use the same procedure for the RH side and LH side.