REAR BUMPER INSTALLATION


  1. INSTALL REAR BUMPER ASSEMBLY


    1. A00409V

      Engage the 4 claws and install the rear bumper assembly as shown in the illustration.

    2. A0043TX

      Engage the 5 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A0043M7

      Install the screw.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Engage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A0042AW

      Engage the 2 rear bumper upper stoppers and install the 2 screws.

    6. A0042B4

      Install the 9 clips.

    7. Install the nut.

  2. BUMPER POSITION SETTING (w/ Intelligent Parking Assist System)

    Click here