FRONT BUMPER DISASSEMBLY


  1. REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER (w/ Headlight Cleaner System)


    1. A004012E01
      Text in Illustration
      *1 Protective Tape

      Extend the headlight cleaner washer nozzle cover.

    2. Using a screwdriver, disengage the 2 claws and remove the headlight cleaner washer nozzle cover.

      Tech Tips


      • Tape the screwdriver tip before use.

      • Use the same procedure for the RH side and LH side.

  2. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A00440TE01
      Text in Illustration
      *1 No. 3 Headlight Cleaner Clamp
      *2 Headlight Cleaner Hose

      Disconnect the headlight cleaner hose.

    2. Remove the No. 3 headlight cleaner clamp.

    3. A00403HE01
      Text in Illustration
      *1 No. 1 Headlight Cleaner Clamp

      Pull down the No. 1 headlight cleaner clamp.

    4. A0040M3E01
      Text in Illustration
      *1 Tab

      Pushing the tab and disengage the 2 claws and remove the headlight washer actuator sub-assembly LH as shown in the illustration.

  3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE ULTRASONIC SENSOR CLIP (w/ Intelligent Parking Assist System)


    1. A0041RXE01
      Text in Illustration
      *A RH Side
      *B LH Side

      Disconnect the connector.

    2. Disengage the clamp.

    3. A0043B6E01
      Text in Illustration
      *A RH Side
      *B LH Side

      Disengage the 4 claws to remove the ultrasonic sensor clip.

  5. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intelligent Parking Assist System)


    1. A003ZYBE01
      Text in Illustration
      *A RH Side
      *B LH Side

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

  6. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intelligent Parking Assist System)


    1. A0043IKE01
      Text in Illustration
      *A RH Side
      *B LH Side

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.

  7. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH


    1. A0041QT

      Disconnect the connector.

    2. Disengage each clamp.

    3. Remove the clip.

    4. Using a screwdriver, disengage the 2 claws and remove the front turn signal light assembly.

  8. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  9. REMOVE FOG LIGHT ASSEMBLY LH


    1. A0043VI

      Disconnect the connector.

    2. Remove the screw.

    3. Disengage the 2 guides and remove the fog light assembly.

  10. REMOVE FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  11. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A0044C3

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the front bumper extension mounting bracket.

  12. REMOVE HOOD TO FRONT END PANEL SEAL


    1. A0043HZE01
      Text in Illustration
      *1 Double-sided Tape

      Remove the clip.

    2. Disengage the 2 clips and remove the hood to front end panel seal.

  13. REMOVE ENGINE ROOM NO. 3 WIRE


    1. A0041GT

      Disengage the 9 clamps and remove the engine room No. 3 wire.

  14. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. A0041ZV

      Disengage the 8 clamps and remove the headlight cleaner hose.

  15. REMOVE RADIATOR GRILLE


    1. A0042HK

      Remove the 4 clips.

    2. A00424F

      Disengage the 12 claws and remove the radiator grille.

  16. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY


    1. A00400U

      Remove the 2 screws.

    2. Disengage the 4 claws and 2 pins, and remove the radiator grille emblem assembly.

  17. REMOVE FRONT FENDER LINER RETAINER


    1. A00416Y

      Disengage the claw and remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. REMOVE FRONT BUMPER HOLE COVER LH


    1. A0043YUE01
      Text in Illustration
      *1 Hook

      Disengage the 3 claws.

    2. Disengage the hook and remove the front bumper hole cover LH.

  19. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  20. REMOVE NO. 2 LOWER RADIATOR GRILLE


    1. A0041D1

      Remove the 2 screws.

    2. A0043O1

      Disengage the 5 claws and pin, and remove the No. 2 lower radiator grille.

  21. REMOVE NO. 1 LOWER RADIATOR GRILLE


    1. A00449S

      Remove the 2 outside moulding retainers.

    2. Disengage the 20 claws and remove the No. 1 lower radiator grille.

  22. REMOVE FRONT BUMPER SEAL


    1. A0042KVE01
      Text in Illustration
      *1 Double-sided Tape

      Remove the front bumper seal.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  23. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A00428Q

      Disengage the 4 guides and remove the front bumper energy absorber.

  24. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A0042HO

      Disengage the 5 clamps.

    2. Remove the 6 bolts.

    3. Disengage the claw and remove the front bumper reinforcement sub-assembly.

  25. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A00401DE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the bolt and screw.

    2. Disengage the 2 claws and remove the front bumper side support LH.

  26. REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure for the RH side and LH side.

  27. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A00430H

      Remove the 4 bolts.

    2. Disengage the guide and remove the front side member bracket sub-assembly LH.

  28. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side.