FRONT BUMPER REMOVAL


  1. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A004098

      Remove the 3 clips.

    2. Disengage the 2 claws and remove the radiator support opening cover.

  2. REMOVE FRONT BUMPER ASSEMBLY


    1. A0040POE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A0042GJ

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A004009

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A00425M

      Remove the 2 bolts and 2 screws.

    5. Using a clip remover, remove the 7 clips.

    6. A00418D

      Using a clip remover, remove the 2 clips.

    7. Remove the 4 screws.

    8. Disengage the 2 guides and remove the front spoiler cover.

    9. A0043WW

      Disengage the 3 claws and remove the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    10. A0042PW

      Pull back the side of the front bumper assembly as shown in the illustration and disconnect the connector.

      Note

      Do not apply excessive force when separating the front bumper.

    11. w/ Headlight Cleaner System:


      1. A0042OB

        Disconnect the headlight cleaner hose and drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

    12. A00411Q

      Remove the front bumper assembly as shown in the illustration.