HORN INSPECTION


  1. INSPECT LOW PITCHED HORN ASSEMBLY


    1. A0040W4E04
      Text in Illustration
      *a

      Component without harness connected

      (Low Pitched Horn Assembly)

      Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal A3-1

      Auxiliary battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the low pitched horn assembly.

  2. INSPECT HIGH PITCHED HORN ASSEMBLY


    1. A0040W4E02
      Text in Illustration
      *a

      Component without harness connected

      (High Pitched Horn Assembly)

      Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal A1-1

      Auxiliary battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the high pitched horn assembly.