TURN SIGNAL FLASHER ASSEMBLY REMOVAL


  1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY

    Click here

  2. REMOVE HEADUP DISPLAY


    1. A003ZYG

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt, 2 nuts and headup display.

  3. REMOVE NO. 3 SIDE DEFROSTER NOZZLE DUCT


    1. A004262

      Remove the clip and No. 3 side defroster nozzle duct.

  4. REMOVE TURN SIGNAL FLASHER ASSEMBLY (for LHD)


    1. A00443E

      Using a screwdriver, disengage the claw.

    2. Disconnect the connector and remove the turn signal flasher assembly.

  5. REMOVE TURN SIGNAL FLASHER ASSEMBLY (for RHD)


    1. A00441I

      Using a screwdriver, disengage the claw.

    2. Disconnect the connector and remove the turn signal flasher assembly.