HEADLIGHT LEVELING ECU REMOVAL

REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

1. for LHD:

   
   
   1. 

      Text in Illustration

      *1	Glove Compartment Door Stopper Sub-assembly
      *2	Moulding Remover
      *3	Lower Instrument Panel Sub-assembly
      *4	Glove Compartment Door Assembly
      *5	Stopper

      Disengage the claw and release the glove compartment door stopper sub-assembly.

   2. Insert the moulding remover into the location shown in the illustration.

   3. Move the moulding remover in the direction indicated by the arrow to bend the lower instrument panel sub-assembly and release the stopper (A).

      Tech Tips

      Use the same procedure to release the stopper (B).

2. for RHD:

   
   
   1. 

      Text in Illustration

      *1	Glove Compartment Door Stopper Sub-assembly
      *2	Stopper

      Disengage the claw and release the glove compartment door stopper sub-assembly.

   2. Slightly bend stoppers (A) and (B) in the directions indicated by the arrows in the illustration and pull the glove compartment door assembly until the stoppers are released.

3. 

   Text in Illustration

   *a	Close
   *b	Open Approximately

   Open the glove compartment door assembly to approximately 55° from its closed position. Pull it horizontally in the direction indicated by the arrow to disengage the 2 hinges and remove the glove compartment door assembly.

   Note

   Pulling the glove compartment door assembly upward to remove it causes the hinges to deform. Be sure to pull out the glove compartment door assembly horizontally.