HEADLIGHT LEVELING ECU INSTALLATION


  1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY (for LHD)


    1. Engage the guide.

    2. Install the headlight leveling ECU assembly with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the connector.

  2. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY (for RHD)


    1. Engage the guide.

    2. Install the headlight leveling ECU assembly with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the connector.

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)


    1. A0041APE01
      Text in Illustration
      *a Opened Approximately 55°
      *b Closed

      With the glove compartment door assembly opened approximately 55° from its closed position, engage the 2 hinges horizontally.

      Note

      Engaging the hinges from the top will deform the hinges. Be sure to install the glove compartment door assembly horizontally.

    2. A0041BCE01
      Text in Illustration
      *1 Glove Compartment Door Stopper Sub-assembly
      *2 Stopper

      Slightly bend the stoppers (A) and (B) in the directions indicated by the arrows in the illustration and engage the stoppers to install the glove compartment door assembly.

    3. Engage the claw and connect the glove compartment door stopper sub-assembly.

  4. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

    Click here

  5. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

    Click here

  6. ADJUST HEADLIGHT AIMING

    Click here