CHARGE LID LIGHT INSTALLATION

INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

1. Engage the 7 claws and 2 clips.

2. Install the deck trim side panel assembly RH with the screw.

INSTALL REAR DECK TRIM COVER

1. Engage the 4 claws to install the rear deck trim cover.

INSTALL DECK TRIM SERVICE HOLE COVER

1. Engage the 4 guides.

2. Engage the 4 claws to install the deck trim service hole cover.

INSTALL REAR NO. 1 FLOOR BOARD

1. Engage the 3 fasteners.

2. Install the rear No. 1 floor board with the clip.

3. Engage each fastener.

INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

1. Engage the claw and 3 clips to install the rear No. 1 floor board sub-assembly.

INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

1. Engage the claw and 2 clips to install the rear No. 2 floor board sub-assembly.

INSTALL DECK FLOOR BOX RH

1. Engage the claw and 4 guide to install the deck floor box RH.

INSTALL REAR NO. 3 FLOOR BOARD

1. Install the rear No. 3 floor board.

INSTALL REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY

1. Install the rear No. 4 floor board sub-assembly.

INSTALL REAR NO. 2 FLOOR BOARD

1. Engage the 3 fasteners.

2. Install the rear No. 2 floor board with the 2 clips.

INSTALL TONNEAU COVER ASSEMBLY

1. Install the tonneau cover assembly.

INSTALL REAR SIDE SEATBACK ASSEMBLY RH

INSTALL REAR SEAT CUSHION ASSEMBLY

1. Place the rear seat cushion assembly in the cabin.

   Note

   Be careful not to damage the vehicle body.

2. 

   Text in Illustration

   *1	Rear Hook
   *2	Front Hook

   Engage the 2 rear hooks of the rear seat cushion assembly to the rear seatback assembly.

3. Engage the 2 front hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.

4. Confirm that the rear seat cushion assembly is firmly installed.

   Note

   When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.

INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

1. 

   Text in Illustration

   *1	Alignment Mark (Blue)

   Align the alignment mark (Blue) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.

   Note

   After installation, check that the corners fit correctly.