REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY


  1. INSTALL REAR COMBINATION LIGHT CLIP


    1. A0042WA

      Install 2 new rear combination light clips.

  2. INSTALL REAR COMBINATION LIGHT GASKET


    1. A0040YJ

      Install a new rear combination light gasket.

  3. INSTALL REAR BUMPER UPPER RETAINER


    1. A00438C

      Engage the claw to install the rear bumper upper retainer.

  4. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A004352

      Connect the connector.

    2. Engage the 4 clamps to install the rear combination light socket and wire sub-assembly.

  5. INSTALL BACK-UP LIGHT BULB


    1. Install the back-up light bulb to the rear combination light socket and wire sub-assembly.

    2. A003ZX7

      Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  6. INSTALL NO. 1 REAR FOG LIGHT BULB


    1. Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.

    2. for LHD:


      1. A003ZX7

        Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

    3. for RHD:


      1. A00423K

        Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  7. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

    2. A004021

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  8. INSTALL REAR COMBINATION LIGHT BODY GASKET


    1. A00419O

      Install a new rear combination light body gasket.