SIDE TURN SIGNAL LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. Install the side turn signal light assembly with the 3 screws.

    2. Connect the connector.

  2. INSTALL OUTER MIRROR COVER


    1. A00408J

      Engage the 7 claws to install the outer mirror cover as shown in the illustration.

      Note


      • Securely engage the claws.

      • Make sure that the outer edge of the outer mirror cover securely fits in the outer rear view mirror assembly.

  3. INSTALL OUTER MIRROR


    1. Connect the 2 connectors.

    2. Engage the 2 guides on the upper part of the outer mirror to the outer mirror.

    3. A00421U

      Engage the 2 claws on the lower part of the outer mirror to the outer mirror.

      Note

      Do not push in the outer mirror with excessive force. Doing so may break the mirror surface.

    4. A004125

      Push the outside part of the outer mirror assembly and tilt it as shown in the illustration.