FRONT TURN SIGNAL LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The following procedure is for the LH side.


  1. INSTALL NO. 3 FRONT TURN SIGNAL LIGHT BRACKET


    1. Engage the 3 guides to temporarily install the No. 3 front turn signal light bracket.

    2. Install the No. 3 front turn signal light bracket with the 2 screws.

    3. Engage the 2 clamps and connect the wire harness.

  2. INSTALL NO. 2 FRONT TURN SIGNAL LIGHT BRACKET


    1. A00429X

      Engage the guide and claw to temporarily install the No. 2 front turn signal light bracket.

    2. Install the No. 2 front turn signal light bracket with the screw.

  3. INSTALL NO. 1 FRONT TURN SIGNAL LIGHT BRACKET


    1. A0043ZB

      Engage the guide and claw to temporarily install the No. 1 front turn signal light bracket.

    2. Install the No. 1 front turn signal light bracket with the screw.

  4. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb to the socket.

    2. A0040FN

      Turn the socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  5. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY


    1. A0042J7

      Engage the 2 claws to temporarily install the front turn signal light assembly.

    2. Install the front turn signal light assembly with the clip.

    3. Engage each clamp.

    4. Connect the connector.

  6. INSTALL FRONT BUMPER ASSEMBLY

    Click here