STOP LIGHT CONTROL RELAY REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE


    1. A0042VN

      Disengage the 10 claws and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM BOARD


    1. A0042AR

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim board LH.

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. A0041MT

      Remove the screw <C>.

    2. A00438O

      Disengage the 6 claws and clip as shown in the illustration.

    3. A00436H

      Disengage the claw and 2 guides and disconnect the hood lock control cable.

    4. Disconnect each connector and clamp, and remove the lower instrument panel finish panel assembly.

  4. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY (for LHD)


    1. A0042JE

      Using a clip remover, disengage the clamp.

    2. Disconnect the connector and remove the stop light control ECU assembly.

  5. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY (for RHD)


    1. A0042US

      Using a clip remover, disengage the clamp.

    2. Disconnect the connector and remove the stop light control ECU assembly.