HEADLIGHT ASSEMBLY REASSEMBLY


  1. INSTALL COVER RING (for LED Headlight)


    1. A0041GX

      Turn the cover ring in the direction indicated by the arrow shown in the illustration to install it.

  2. INSTALL HEADLIGHT GASKET (for LED Headlight)


    1. Install a new headlight gasket.

  3. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for LED Headlight)


    1. A00402C

      Connect the connector.

    2. A00412F

      Install the headlight light control ECU sub-assembly with the 4 screws.

  4. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (for Halogen Headlight)


    1. Install a new headlight leveling motor base packing.

  5. INSTALL HEADLIGHT LEVELING MOTOR (for Halogen Headlight)


    1. A0040XVE02
      Text in Illustration
      *1 Aiming Screw

      Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

    2. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

    3. A0040A8E01
      Text in Illustration
      *1 Aiming Screw

      Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration and engage the pin to install the headlight leveling motor to the headlight unit.

      Tech Tips

      When installing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction indicated by the arrow (3) shown in the illustration.

    4. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to install it.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

  6. INSTALL HEADLIGHT CORD (for Halogen Headlight)


    1. A0042UN

      Engage the 2 clamps and install the headlight cord.

  7. INSTALL CLEARANCE LIGHT BULB (for Halogen Headlight)


    1. Install the clearance light bulb to the headlight cord.

    2. A004213

      Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow shown in the illustration and connect them as a unit.

  8. INSTALL NO. 2 HEADLIGHT BULB (for Halogen Headlight)


    1. A00446B

      Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

      Note


      • Do not touch the bulb glass.

      • Correctly align the 3 tabs on the bulb when installing it to the headlight assembly.

  9. INSTALL NO. 1 HEADLIGHT BULB


    1. A0042EN

      Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

      Note


      • Do not touch the bulb glass.

      • Correctly align the 3 tabs on the bulb when installing it to the headlight assembly.