HEADLIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE NO. 1 HEADLIGHT BULB


    1. A004268

      Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  2. REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight)


    1. A0040A1

      Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  3. REMOVE CLEARANCE LIGHT BULB (for Halogen Headlight)


    1. A0043ZC

      Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the clearance light bulb from the headlight cord.

  4. REMOVE HEADLIGHT CORD (for Halogen Headlight)


    1. A0042UN

      Disengage the 2 clamps and remove the headlight cord.

  5. REMOVE HEADLIGHT LEVELING MOTOR (for Halogen Headlight)


    1. A0040PVE01
      Text in Illustration
      *1 Aiming Screw

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

      Tech Tips


      • Turn the aiming screw until the headlight leveling motor can be moved in the direction indicated by the arrow (2) shown in the illustration.

      • Make sure to remember the number of aiming screw rotations.

    2. Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to disengage the pin.

      Tech Tips

      When removing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction indicated by the arrow (2) shown in the illustration.

    3. A0043ZGE02
      Text in Illustration
      *1 Aiming Screw

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

      Tech Tips

      Make sure to remember the number of aiming screw rotations.

    4. Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.

  6. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING (for Halogen Headlight)


    1. Remove the headlight leveling motor base packing.

      Note

      After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.

  7. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for LED Headlight)


    1. A00412F

      Remove the 4 screws and disconnect the headlight light control ECU sub-assembly.

    2. A00402C

      Disconnect the connector and remove the headlight light control ECU sub-assembly.

  8. REMOVE HEADLIGHT GASKET (for LED Headlight)


    1. Remove the headlight gasket.

      Note

      After the headlight gasket is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.

  9. REMOVE COVER RING (for LED Headlight)


    1. A0044B4

      Turn the cover ring in the direction indicated by the arrow shown in the illustration, and remove it.