FRONT TURN SIGNAL LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY (w/o Daytime Running Light)


    1. A0041G4

      Disconnect the connector.

    2. Disengage each clamp.

    3. Remove the clip.

    4. Using a screwdriver, disengage the 2 claws and remove the front turn signal light assembly.

  3. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY (w/ Daytime Running Light)


    1. A0041QT

      Disconnect the connector.

    2. Disengage each clamp.

    3. Remove the clip.

    4. Using a screwdriver, disengage the 2 claws and remove the front turn signal light assembly.

  4. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/o Daytime Running Light)


    1. A00445Y

      Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the front turn signal light bulb from the front turn signal light plug assembly.

  5. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/ Daytime Running Light)


    1. A00442F

      Turn the socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the front turn signal light bulb from the socket.

  6. REMOVE NO. 1 FRONT TURN SIGNAL LIGHT BRACKET


    1. A0040FGE01
      Text in Illustration
      *A w/o Daytime Running Light
      *B w/ Daytime Running Light

      Remove the screw.

    2. Using a screwdriver, disengage the claw and guide, and remove the No. 1 front turn signal light bracket.

  7. REMOVE NO. 2 FRONT TURN SIGNAL LIGHT BRACKET


    1. A0043JHE01
      Text in Illustration
      *A w/o Daytime Running Light
      *B w/ Daytime Running Light

      Remove the screw.

    2. Using a screwdriver, disengage the claw and guide, and remove the No. 2 front turn signal light bracket.

  8. REMOVE NO. 3 FRONT TURN SIGNAL LIGHT BRACKET (w/o Daytime Running Light)


    1. A004221

      Remove the 2 screws.

    2. Disengage the 3 guides and remove the No. 3 front turn signal light bracket.

  9. REMOVE NO. 3 FRONT TURN SIGNAL LIGHT BRACKET (w/ Daytime Running Light)


    1. A0042GYE01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Disengage the 2 clamps and disconnect the wire harness.

    2. Remove the 2 screws.

    3. Disengage the 3 guides and remove the No. 3 front turn signal light bracket.