RAIN SENSOR REMOVAL


  1. REMOVE RAIN SENSOR COVER


    1. A0042AB

      Disconnect the rain sensor cover as shown in the illustration.

    2. Disengage the 2 claws and remove the rain sensor cover.

  2. REMOVE RAIN SENSOR


    1. A0043LY

      Disconnect the connector.

    2. A0042DME01
      Text in Illustration
      *1 Stopper

      Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.

  3. CLEAN WINDSHIELD GLASS

    Note


    • The rain sensor tape can be reused, however, replace it with a new one if it has dirt on it or it is damaged.

    • Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.