WASHER NOZZLE (for Rear Side) ON-VEHICLE INSPECTION


  1. INSPECT REAR WASHER NOZZLE


    1. With the engine running, check that the center stream of washer fluid sprays on the back door glass within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the back door glass in the area shown in the illustration.
      A0043TJE01
      Standard Clearance
      Area Measurement Area Measurement
      A 48.7 mm (1.92 in.) - -

      Tech Tips

      If the result is not as specified, replace the malfunctioning rear washer nozzle.