WASHER NOZZLE (for Front Side) ADJUSTMENT


  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A0042VIE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note


      • Be careful not to damage the windshield glass.

      • Washer nozzle sub-assembly cannot be reused.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A00424P

      Remove the washer nozzle sub-assembly from the washer hose.

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle sub-assembly so that the contact area is within the standard. Replace the washer nozzle sub-assembly with the selected one.

      A0041DTE02
      Text in Illustration
      *a Available Washer Nozzle Sub-assembly *b Washer Fluid Spray Angle
      *c Part Number - -

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. A0042E8E01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.