WASHER MOTOR (for Front Side) INSTALLATION


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A0041TV

      Install the windshield washer motor and pump assembly.

    2. Connect the connector.

    3. Connect the washer hose.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. Install a new grommet and the 4 screws.

    2. Install the 10 clips.

    3. A0040CSE01
      Text in Illustration
      *1 Correct
      *2 Incorrect

      Install the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

  4. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }