WASHER MOTOR (for Front Side) REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER LINER RH


    1. A0044AQE01

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    2. A0043PN

      Remove the 10 clips and 4 screws.

    3. Using a clip remover, remove the grommet and front fender liner RH.

      Tech Tips

      The grommet needs to be replaced with new one because it will break when it is removed.

  3. DRAIN WASHER FLUID


    1. A0041NU

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  4. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A0042BQ

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly.