REAR WIPER RUBBER REPLACEMENT


  1. REMOVE REAR WIPER BLADE ASSEMBLY (w/ Resin Wiper Arm)


    1. A004236

      Raise the rear wiper blade assembly to the position where the claw detaches with a click sound as shown in the illustration.

      Note

      Be careful not to damage the claw.

    2. Pull the rear wiper blade assembly straight toward to remove it from the rear wiper arm.

      Note

      Do not lower the rear wiper arm with the rear wiper blade assembly removed. The arm tip may damage the back door glass surface.

  2. REMOVE REAR WIPER BLADE ASSEMBLY (w/ Steel Wiper Arm)


    1. A004136

      Disengage the claw as shown in the illustration.

    2. A0042CG

      Remove the rear wiper blade assembly as shown in the illustration.

      Note

      Do not lower the rear wiper arm with the rear wiper blade assembly removed. The arm tip may damage the back door glass surface.

  3. REMOVE REAR WIPER RUBBER (w/ Resin Wiper Arm)


    1. A0043K7E04
      Text in Illustration
      *1 Stopper
      *a Lightly Push
      *b Lift
      *c Pull

      Lift and pull the end of the rear wiper rubber protrusion from the blade stopper as shown in the illustration.

      Note

      Do not forcibly pull out the rear wiper rubber. The rear wiper rubber backing plates will be deformed or the rear wiper blade assembly claws will be damaged.

      Tech Tips

      Lightly pushing the rear wiper rubber in the middle will allow it to be removed more easily.

    2. Remove the 2 rear wiper rubber backing plates.

  4. REMOVE REAR WIPER RUBBER (w/ Steel Wiper Arm)


    1. A0040WY

      Detach the head part (large side) of the rear wiper rubber from the rear wiper blade assembly.

    2. A0043PXE02
      Text in Illustration
      *a Head Part (Large Side)

      Remove the rear wiper rubber in the direction indicated by the arrow in the illustration.

      Note

      Do not pull out the rear wiper rubber forcibly. Doing so will deform the rear wiper rubber backing plate or damage the rear wiper blade assembly claw.

    3. Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.

  5. INSTALL REAR WIPER RUBBER (w/ Resin Wiper Arm)


    1. A0042L8E08
      Text in Illustration
      *1 Rear Wiper Rubber Backing Plate
      *2 Rear Wiper Rubber
      *a Curve

      Install the 2 rear wiper rubber backing plates as shown in the illustration.

      Note

      Install the 2 rear wiper rubber backing plates facing the correct direction.

    2. Insert the rear wiper rubber from the front end of the rear wiper blade assembly to the rear end through the second claw.

    3. A0042BSE06
      Text in Illustration
      *a Second Claw
      *b Rear End Claw
      *c Rear End Stopper

      After pushing the rear wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.

    4. A0040Q2E06
      Text in Illustration
      *a Front End Claw

      Slide the rear wiper rubber through the front end claw.

  6. INSTALL REAR WIPER RUBBER (w/ Steel Wiper Arm)


    1. A0042O7E08
      Text in Illustration
      *1 Rear Wiper Rubber Backing Plate
      *2 Rear Wiper Rubber
      *a Curve

      Install the 2 rear wiper rubber backing plates as shown in the illustration.

      Note

      Install the 2 rear wiper rubber backing plates facing the correct direction.

    2. A003ZYOE02
      Text in Illustration
      *a Head Part (Large Side)

      Attach the head part (large side) of the rear wiper rubber to the rear end side claw of the rear wiper blade assembly.

    3. A0043G7

      Install the rear wiper rubber to the claw of the rear wiper blade assembly in the direction indicated by the arrow in the illustration.

      Note

      Push the rear wiper blade assembly into the grooves of the rear wiper rubber to attach them completely.

      Tech Tips

      Install the rear wiper rubber so that the head part (large side) of the rear wiper rubber faces the arm axle side.

  7. INSTALL REAR WIPER BLADE ASSEMBLY (w/ Resin Wiper Arm)


    1. A0043OG

      Push the rear wiper blade assembly straight toward to install it to the rear wiper arm.

    2. Engage the claw to install the rear wiper blade assembly as shown in the illustration.

      Note

      Be careful not to damage the claw.

  8. INSTALL REAR WIPER BLADE ASSEMBLY (w/ Steel Wiper Arm)


    1. A0040T1

      Engage the claw to install the rear wiper blade assembly.