LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Light Control.

      5. Select the setting by referring to the table below.

        Light Control
        Tester Display Default Content Setting Relevant ECU
        Sensitivity Normal Adjusts the sensitivity of the automatic light control sensor.*A Light2, Light1, Normal, Dark1 or Dark2
        Disp Ex ON Sen NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2
        Disp Ex OFF Sen NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*C LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

        *A
        Lighting Brightness A00441B
        Setting Dark2 Dark1 Normal Light1 Light2
        *B
        Brightness of lowering the lights A00441B
        Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
        *C
        Brightness when canceling the lowering of the lights A00441B
        Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2

    2. Customizing with the multi-display (for Navigation Receiver Type)


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Light settings.

      3. Select the setting by referring to the table below.

        Lights settings
        Display Default Content Setting Relevant ECU
        Light Sensor Sensitivity 0 Adjusts the sensitivity of the automatic light control sensor.*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

        *A
        Lighting Brightness A00441B
        Setting -2 -1 0 1 2

    3. Customizing with the multi-display (for Radio and Display Type)


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle settings.

      3. Select the setting by referring to the table below.

        Vehicle settings
        Display Default Content Setting Relevant ECU
        Light Sensor Sensitivity 0 Adjusts the sensitivity of the automatic light control sensor.*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

        *A
        Lighting Brightness A00441B
        Setting -2 -1 0 1 2