OUTER REAR VIEW MIRROR COVER REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE OUTER MIRROR


    1. A00449J

      Push the outside part of the outer rear view mirror assembly and tilt it as show in the illustration.

    2. A0043WIE02
      Text in Illustration
      *1 Protective Tape

      Push the upper part of the outer mirror surface and tilt it.

    3. Apply protective tape as shown in the illustration.

    4. A0043QQ

      Using a moulding remover, disengage the 2 claws at the lower part of the outer mirror, and separate the outer mirror.

      Note

      Do not pull the outer mirror with excessive force. Doing so may cause the actuator to come off or break the outer mirror surface.

    5. A0041DR

      Disengage the 2 guides as shown in the illustration.

    6. Disconnect the 2 connectors and remove the outer mirror.

  2. REMOVE OUTER MIRROR COVER


    1. A0040UB

      Disengage the 4 claws.

    2. A0042R5

      Disengage the 3 claws and remove the outer mirror cover as shown in the illustration.