OUTER REAR VIEW MIRROR

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH

Inspect the operation of the mirror surface.

Text in Illustration
*a	Component without harness connected (Outer Rear View Mirror Assembly LH)

Disconnect the outer rear view mirror assembly LH connector.

Apply auxiliary battery voltage and check the operation of the mirror.

OK

Measurement Condition	Specified Condition
Auxiliary battery positive (+) → Terminal 6 (MV) Auxiliary battery negative (-) → Terminal 5 (M+)	Turns upward
Auxiliary battery positive (+) → Terminal 5 (M+) Auxiliary battery negative (-) → Terminal 6 (MV)	Turns downward
Auxiliary battery positive (+) → Terminal 4 (MH) Auxiliary battery negative (-) → Terminal 5 (M+)	Turns left
Auxiliary battery positive (+) → Terminal 5 (M+) Auxiliary battery negative (-) → Terminal 4 (MH)	Turns right

If the result is not as specified, replace the outer rear view mirror assembly LH.

Check the mirror heater (w/ Mirror heater).

Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection	Condition	Specified Condition
Terminal 8 (HL-) - Terminal 3 (HL+)	25°C (77°F)	7.6 to 11.4 Ω

If the result is not as specified, replace the outer rear view mirror assembly.

INSPECT OUTER MIRROR RETRACTOR LH

Inspect the operation of the retractable mirror.

Note

Disconnect and reconnect the auxiliary battery between each mirror position check.
The mirror position cannot be changed manually when the auxiliary battery is connected. To change the mirror position manually, the auxiliary battery must be disconnected first.

Text in Illustration
*1	(A) Forward Position
*2	(B)
*3	(C) Driving position
*4	(D)
*5	(E) Retracted Position
*a	Component without harness connected (Outer Rear View Mirror Assembly LH)

Disconnect the outer rear view mirror assembly LH connector.

For each position: Disconnect the auxiliary battery, set the mirror position by hand, connect the auxiliary battery, and check the retractable mirror's movement.

OK

Tester Connection	Condition	Specified Condition
Auxiliary battery positive (+) → Terminal 11 (MR) Auxiliary battery negative (-) → Terminal 10 (MF)	Forward position (A)	Moves from (A) to (E)
Auxiliary battery positive (+) → Terminal 10 (MF) Auxiliary battery negative (-) → Terminal 11 (MR)	Forward position (A)	Does not move
Auxiliary battery positive (+) → Terminal 11 (MR) Auxiliary battery negative (-) → Terminal 10 (MF)	Position between forward position (A) and driving position (C)	Moves from (B) to (E)
Auxiliary battery positive (+) → Terminal 10 (MF) Auxiliary battery negative (-) → Terminal 11 (MR)	Position between forward position (A) and driving position (C)	Moves from (B) to (A)
Auxiliary battery positive (+) → Terminal 11 (MR) Auxiliary battery negative (-) → Terminal 10 (MF)	Driving position (C)	Moves from (C) to (E)
Auxiliary battery positive (+) → Terminal 10 (MF) Auxiliary battery negative (-) → Terminal 11 (MR)	Driving position (C)	Does not move
Auxiliary battery positive (+) → Terminal 11 (MR) Auxiliary battery negative (-) → Terminal 10 (MF)	Position between driving position (C) and retracted position (E)	Moves from (D) to (E)
Auxiliary battery positive (+) → Terminal 10 (MF) Auxiliary battery negative (-) → Terminal 11 (MR)	Position between driving position (C) and retracted position (E)	Moves from (D) to (C)
Auxiliary battery positive (+) → Terminal 11 (MR) Auxiliary battery negative (-) → Terminal 10 (MF)	Retracted position (E)	Does not move
Auxiliary battery positive (+) → Terminal 10 (MF) Auxiliary battery negative (-) → Terminal 11 (MR)	Retracted position (E)	Moves from (E) to (C)