REAR WIPER MOTOR REMOVAL


  1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY


    1. A0043TV

      Using a moulding remover, disengage the 4 clips and 4 claws, and remove the upper back door trim panel assembly.

  2. REMOVE BACK DOOR SIDE GARNISH RH


    1. A0043NX

      Disengage the 3 clips and 2 claws, and remove the back door side garnish RH.

  3. REMOVE BACK DOOR SIDE GARNISH LH


    1. A0043SN

      Disengage the 3 clips and 2 claws, and remove the back door side garnish LH.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A0040AI

      Using a moulding remover, disengage the clip and claw.

    2. A00409C

      Using a moulding remover, disengage the clip and claw.

    3. A0040K2E01

      Disengage the 3 clips in the order shown in the illustration.

    4. A0043OY

      Disengage the 2 clips by pulling the back door trim board assembly in the direction indicated by the arrows in the illustration.

    5. A0043CXE01
      Text in Illustration
      *1 Back Door Trim Board Assembly
      *2 Back Door Panel
      *a The portion that may be damaged due to interference

      Remove the back door trim board assembly by pulling it in the direction indicated by the arrow in the illustration to disengage the 4 clips.

      Note

      Make sure to pull the back door trim board assembly in the direction indicated by the arrow in the illustration. If the back door trim board assembly is removed from the lower part, the door pull handle mounting area may interfere with the back door panel, resulting in damage to the back door trim board assembly.

  5. REMOVE BACK DOOR TRIM BOARD


    1. A0042Y4

      Disengage the 5 clips and 2 guides, and remove the back door trim board.

  6. REMOVE REAR WIPER ARM HEAD CAP (w/ Resin Wiper Arm)


    1. A00447M

      Disengage the 2 claws and open the rear wiper arm head cap as shown in the illustration.

    2. A0042UU

      Disengage the 2 claws and remove the rear wiper arm head cap.

  7. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. w/ Resin Wiper Arm:


      1. A0040EM

        Remove the nut and rear wiper arm and blade assembly.

    2. w/ Steel Wiper Arm:


      1. A0043WQE01
        Text in Illustration
        *1 Rear Wiper Arm Head Cap

        Open the rear wiper arm head cap.

      2. Remove the nut and rear wiper arm and blade assembly.

  8. REMOVE REAR WIPER MOTOR GROMMET


    1. A004348

      Remove the rear wiper motor grommet.

  9. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A004140

      Disconnect the connector.

    2. Remove the 3 bolts and rear wiper motor assembly.