HOOD REASSEMBLY


  1. INSTALL HOOD STAY BRACKET


    1. A00429A

      Install the hood stay bracket with the bolt.

  2. INSTALL HOOD SUPPORT ASSEMBLY


    1. A00418R

      Engage the 3 claws and install the hood support assembly.

  3. INSTALL HOOD STAY HOLDER


    1. A0040P2

      Engage the 2 claws and install the hood stay holder.

  4. CONNECT WASHER HOSE ASSEMBLY


    1. A0044AM

      Engage the 6 clips to connect the washer hose assembly.

  5. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. A0042E8E01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.

  6. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield glass.

      Standard
      Washer fluid hits the windshield glass in the areas shown in the illustration.
      A0042XWE02
      Standard Clearance
      Area Measurement Area Measurement
      A 95.8 mm (3.77 in.) B 323.6 mm (1.06 ft.)
      C 161.4 mm (6.35 in.) D 155.7 mm (6.13 in.)
      E 443.7 mm (1.46 ft.) F 546.6 mm (1.79 ft.)
      G 208.2 mm (8.20 in.) H 82.1 mm (3.23 in.)
      Text in Illustration
      *A for Low Pressure Pump *B for High Pressure Pump
      *1 Upper Limit *2 Standard
      *3 Lower Limit - -

      Tech Tips

      If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.

  7. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle sub-assembly so that the contact area is within the standard. Replace the washer nozzle sub-assembly with the selected one.

      A0041DTE02
      Text in Illustration
      *a Available Washer Nozzle Sub-assembly *b Washer Fluid Spray Angle
      *c Part Number - -

  8. INSTALL HOOD INSULATOR


    1. A0042LW

      Install the hood insulator with the 6 clips.

  9. INSTALL HOOD AUXILIARY CATCH HOOK ASSEMBLY


    1. A00440U

      Install the hood auxiliary catch hook assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }