WINDOW DEFOGGER WIRE REPAIR


  1. REPAIR REAR WINDOW DEFOGGER WIRE

    A004317E20
    Text in Illustration
    *1 Masking Tape
    *2 Broken Wire
    *a Repair Point

    1. Clean the broken wire tips with a grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. A00413D

      Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).

    4. Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not use the rear window defogger for at least 24 hours after performing the repair.