BACK DOOR SUPPORT REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE BACK DOOR STAY ASSEMBLY

    Note


    • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

    • Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

    • Do not apply any horizontal load to the door stay in order to prevent the piston rod from deforming.


    1. A0043I2E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the 2 stop rings along the groove.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Release the 2 ball joints and remove the back door stay assembly.

      Note

      Remove the back door stay assembly while supporting the back door by hand.

  2. REMOVE BACK DOOR STAY BOLT


    1. A0043B2

      Remove the back door stay bolt.

  3. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET


    1. A0041HK

      Remove the 2 bolts and back door upper damper stay bracket.