AIR CONDITIONING AMPLIFIER REMOVAL


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE REAR NO. 3 FLOOR BOARD


    1. Remove the rear No. 3 floor board.

  3. REMOVE DECK FLOOR BOX RH


    1. Fold back the rear No. 2 floor board.

    2. Remove the deck floor box RH Click here.

  4. REMOVE REAR NO. 3 FLOOR BOARD UPPER PLATE


    1. A0040W5

      Disengage the 2 claws and remove the rear No. 3 floor board upper plate.

  5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE CONSOLE BOX INSERT


    1. A0042UIE01

      Pull the console box insert in the direction indicated by the arrow to disengage the 4 claws and guide, and remove the console box insert.

  7. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


    1. A0043QO

      Disconnect each connector and remove the screw.

    2. A003ZX4

      Disengage the guide as shown in the illustration.

    3. A0040DK

      Disengage the guide and remove the air conditioning amplifier assembly as shown in the illustration.