AIR CONDITIONING PRESSURE SENSOR REMOVAL


  1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM


    1. Start the hybrid system.

    2. Operate the cooler compressor under the conditions show below:

      Item Condition
      Engine Speed Idling
      Operating Time 3 minutes or more
      A/C Switch Status ON
      Blower Switch Status HI
      Set Temperature MAX COOL

      This causes most of the compressor oil from the various components of the A/C system to collect in the A/C compressor.

      Tech Tips

      There is no need to operate the cooler compressor if the A/C does not operate because of compressor lock, etc.

    3. Stop the engine.

    4. Recover the refrigerant from the A/C system using a refrigerant recovery unit.

      Tech Tips

      Use the refrigerant recovery unit in accordance with the manufacturer's instruction manual.

  2. REMOVE AIR CONDITIONING PRESSURE SENSOR


    1. A004226

      Disconnect the connector.

    2. Remove the air conditioning pressure sensor.

      Note

      Do not deform the piping.