FRONT BLOWER MOTOR REMOVAL


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A0042YL

      Disengage the 3 claws and guide.

    2. Disconnect each connector and remove the No. 2 instrument panel under cover sub-assembly.

  2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. w/ PTC Heater:


      1. A0043UXE01
        Text in Illustration
        *A w/ PTC Heater

        Remove the screw and disconnect the quick heater assembly connector.

    2. Disengage the clamp.

    3. Disconnect the connector.

    4. Remove the 3 screws and blower with fan motor sub-assembly.

      Note

      When removing the blower with fan motor sub-assembly do not damage or strike it.