FRONT BLOWER MOTOR INSTALLATION


  1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. Install the blower with fan motor sub-assembly with the 3 screws.

      Note

      When installing the blower with fan motor sub-assembly do not damage or strike it.

    2. Connect the connector.

    3. Engage the clamp.

    4. w/ PTC Heater:


      1. Connect the quick heater assembly connector with the screw.

  2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.