REAR CENTER SEAT OUTER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY RH

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  3. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0041DUE01
      Text in Illustration
      *1 Front Hook
      *2 Rear Hook

      Disengage the front hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      Dimension Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a front hook to disengage first. Place your hands near the front hook as shown in the illustration. Then lift the seat cushion to disengage the front hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 rear hooks of the rear seat cushion assembly from the rear seatback assembly.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  4. DISCONNECT REAR CENTER SEAT BELT ASSEMBLY


    1. A0042G0

      Remove the bolt and disconnect the anchor part of the rear center seat belt assembly.

  5. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Fold the rear seatback assembly RH forward.

    2. A0043NYE01
      Text in Illustration
      *1 Fastener

      Disengage the 3 fasteners.

    3. A00448V

      Remove the 2 bolts and rear seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR SEATBACK CENTER COVER (for RHD)


    1. A0042LD

      Disengage the 4 claws and remove the rear seatback center cover.

  7. REMOVE REAR SEATBACK COVER RH


    1. A0041UU

      Disengage the 4 claws and remove the rear seatback cover RH.

  8. REMOVE REAR SEAT SHOULDER BELT GUIDE RH


    1. A0040I5

      Remove the 2 screws.

    2. Disengage the guide and remove the rear seat shoulder belt guide RH.

  9. REMOVE REAR SEATBACK STOP BUTTON GROMMET


    1. A0040OE

      Disengage the 3 claws and remove the rear seatback stop button grommet.

  10. REMOVE CENTER ARMREST HINGE COVER


    1. A0043ADE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the center armrest hinge cover as shown in the illustration.

  11. REMOVE SEAT BELT ANCHOR COVER CAP


    1. A0042HY

      Disengage the 2 claws and remove the seat belt anchor cover cap.

  12. REMOVE REAR SEAT SHOULDER BELT COVER


    1. A0041Y9E01

      Disengage the 4 claws and remove the rear seat shoulder belt cover as shown in the illustration.

  13. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. A00441L

      Remove the bolt and bush.

    2. Disengage the guide and remove the rear center seat armrest assembly.

    3. A0041GN

      Remove the bush.

  14. REMOVE REAR SEATBACK COVER WITH PAD RH


    1. A0040U7

      Using a clip remover, remove the 3 clips.

    2. Disengage the 6 claws.

    3. A00419G

      Remove the 16 hog rings.

    4. A0042NV

      Disengage the 4 claws and remove the 2 rear seat center headrest supports.

    5. A00414S

      Disengage the 4 claws and remove the 2 rear seat headrest supports.

    6. Remove the rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.

  15. REMOVE REAR CENTER SEAT BELT ASSEMBLY


    1. A0043CW

      Remove the nut and rear center seat belt assembly.