REAR CENTER SEAT OUTER BELT ASSEMBLY INSTALLATION


  1. INSTALL REAR CENTER SEAT BELT ASSEMBLY


    1. A0041BHE01
      Text in Illustration
      *1 Protruding Part

      Install the rear center seat belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the rear center seat belt assembly to overlap the protruding part of the rear seat back frame.

  2. INSTALL REAR SEATBACK COVER WITH PAD RH


    1. Temporarily install the rear seatback cover with pad RH to the rear seatback frame sub-assembly RH.

    2. A00414S

      Engage the 4 claws to install the 2 rear seat headrest supports.

    3. A0042NV

      Engage the 4 claws to install the 2 rear seat center headrest supports.

    4. A003ZXU

      Using hog ring pliers, install 16 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    5. A0040U7

      Engage the 6 clips.

    6. Install the 3 clips.

  3. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY


    1. A0041GN

      Install the bush.

    2. A00441L

      Engage the guide to install the rear center seat armrest assembly.

    3. Install the bolt and bush.

  4. INSTALL REAR SEAT SHOULDER BELT COVER


    1. A0041G6E01

      Engage the 4 claws to install the rear seat shoulder belt cover as shown in the illustration.

  5. INSTALL SEAT BELT ANCHOR COVER CAP


    1. A0042HY

      Engage the 2 claws to install the seat belt anchor cover cap.

  6. INSTALL CENTER ARMREST HINGE COVER


    1. A0042OD

      Engage the claw to install the center armrest hinge cover as shown in the illustration.

  7. INSTALL REAR SEATBACK STOP BUTTON GROMMET


    1. A0040OE

      Engage the 3 claws to install the rear seatback stop button grommet.

  8. INSTALL REAR SEAT SHOULDER BELT GUIDE RH


    1. A0040I5

      Engage the guide.

    2. Install the rear seat shoulder belt guide RH with the 2 screws.

  9. INSTALL REAR SEATBACK COVER RH


    1. A0041UU

      Engage the 4 claws to install the rear seatback cover RH.

  10. INSTALL REAR SEATBACK CENTER COVER (for RHD)


    1. A0042LD

      Engage the 4 claws to install the rear seatback center cover.

  11. INSTALL REAR SEATBACK ASSEMBLY RH


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

    3. Engage the 3 fasteners.

  12. CONNECT REAR CENTER SEAT BELT ASSEMBLY


    1. A00421ME01
      Text in Illustration
      *1 Protruding Part

      Connect the anchor part of the rear center seat belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat belt assembly to overlap the protruding part of the rear seat inner belt assembly RH.

  13. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. Place the rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A0042WJE01
      Text in Illustration
      *1 Rear Hook
      *2 Front Hook

      Engage the 2 rear hooks of the rear seat cushion assembly to the rear seatback assembly.

    3. Engage the 2 front hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.

    4. Confirm that the rear seat cushion assembly is firmly installed.

      Note

      When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.

  14. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

  15. INSTALL REAR SEAT HEADREST ASSEMBLY RH