REAR SEAT INNER BELT ASSEMBLY (for RH Side) REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0041DUE01
      Text in Illustration
      *1 Front Hook
      *2 Rear Hook

      Disengage the front hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      Dimension Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a front hook to disengage first. Place your hands near the front hook as shown in the illustration. Then lift the seat cushion to disengage the front hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 rear hooks of the rear seat cushion assembly from the rear seatback assembly.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE REAR SEAT HEADREST ASSEMBLY

  3. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  4. DISCONNECT REAR CENTER SEAT BELT ASSEMBLY


    1. A0042G0

      Remove the bolt and disconnect the anchor part of the rear center seat belt assembly.

  5. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Fold the rear seatback assembly RH forward.

    2. A0043NYE01
      Text in Illustration
      *1 Fastener

      Disengage the 3 fasteners.

    3. A00448V

      Remove the 2 bolts and rear seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR SEAT INNER BELT ASSEMBLY RH


    1. A0042KY

      Disconnect the connector and disengage the clamp.

    2. Remove the bolt and the rear seat inner belt assembly RH.