REAR SEAT INNER BELT ASSEMBLY (for LH Side) REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0041DUE01
      Text in Illustration
      *1 Front Hook
      *2 Rear Hook

      Disengage the front hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      Dimension Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a front hook to disengage first. Place your hands near the front hook as shown in the illustration. Then lift the seat cushion to disengage the front hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 rear hooks of the rear seat cushion assembly from the rear seatback assembly.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE REAR SEAT HEADREST ASSEMBLY

  3. REMOVE REAR SEATBACK ASSEMBLY LH


    1. Fold the rear seatback assembly LH forward.

    2. A00435HE01
      Text in Illustration
      *1 Fastener

      Disengage the 3 fasteners.

    3. A0044A4

      Remove the 2 bolts and rear seatback assembly LH.

      Note

      Be careful not to damage the vehicle body.

  4. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A0041ZO

      Disconnect the 2 connectors and disengage the clamp.

    2. Remove the bolt and the rear seat inner with center belt assembly LH.