FRONT SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    A0040ATE04
    Text in Illustration
    *a

    Component without harness connected

    (Front Seat Inner Belt Assembly (for Driver Side))

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 2 Driver side seat belt not fastened Below 1 Ω
      3 - 2 Driver side seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for driver side).

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    A0040NVE23
    Text in Illustration
    *A for LHD
    *B for RHD
    *a

    Component without harness connected

    (Front Seat Inner Belt Assembly (for Front Passenger Side))

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      S5-3 (+) - B-1*1

      R5-3 (+) - B-1*2

      		 Always Below 1 Ω

      S5-2 (E) - B-3*1

      R5-2 (E) - B-3*2

      		 Front passenger side seat belt not fastened Below 1 Ω

      S5-2 (E) - B-3*1

      R5-2 (E) - B-3*2

      		 Front passenger side seat belt fastened 10 kΩ or higher

      • *1: for LHD

      • *2: for RHD

      If the result is not as specified, replace the front seat inner belt assembly (for front passenger side).