OCCUPANT DETECTION SENSOR REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect the connector under the front seat assembly.

    2. Disengage each clamp under the front seat assembly.

    3. A0040OV

      Remove the nut and front seat inner belt assembly.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  4. REMOVE FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  5. REMOVE FRONT INNER SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat Click here.

  6. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A0040K0

      Disconnect the rubber band.

    2. A0040AY

      Disengage the 4 hooks.

    3. A0041BK

      Disengage the 4 clamps and disconnect the seat heater wire harness.

    4. A0041K6

      Disconnect the seat heater connector.

    5. Disengage the clamp and disconnect the seat heater wire harness.

    6. A00407G

      Disengage the fastener and disconnect the front seat airbag assembly wire harness.

    7. for Front Passenger Side:


      1. A00434Z

        Disengage the hook and disconnect the belt warning occupant detection sensor connector.

    8. A0041DK

      Disengage the 2 hooks as shown in the illustration.

    9. Disengage each hook and remove the separate type front seat cushion cover with pad from the separate type front seat cushion spring assembly as shown in the illustration.

      A004156

  7. REMOVE OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. A0043WZ

      Remove the 2 hog rings.

    2. A0042OG

      Remove the 11 hog rings and the separate type front seat cushion cover from the occupant detection sensor (separate type front seat cushion pad).