FRONT PASSENGER SEAT BELT WARNING LIGHT INSTALLATION


  1. INSTALL TELLTALE LIGHT ASSEMBLY


    1. A0041L8

      Engage the 2 claws and install the telltale light assembly as shown in the illustration.

  2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 7 claws.

    3. Install the center instrument cluster finish panel garnish with the 2 screws <C>.

  3. INSTALL GLOVE COMPARTMENT DOOR


    1. Open the glove compartment door assembly and glove compartment door.

    2. A0040EP

      Insert the glove compartment door as shown in the illustration.

    3. Engage the 7 claws to install the glove compartment door.

  4. INSTALL NO. 2 INSTRUMENT PANEL REGISTER


    1. A00430F

      Engage the 3 claws and clip to install the No. 2 instrument panel register.

  5. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A00426P

      Engage the 3 claws to install the No. 1 side defroster nozzle.

  6. INSTALL NAVIGATION RECEIVER WITH BRACKET (for Navigation Receiver Type)


    1. Connect each connector.

    2. A0042X9

      Engage the 4 claws and temporarily install the navigation receiver with bracket as shown in the illustration.

    3. Install the navigation receiver with bracket with the 4 bolts.

  7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)


    1. Connect each connector.

    2. Engage the 4 claws.

    3. Install the radio and display receiver assembly with bracket with the 4 bolts.

  8. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    1. A0040KM

      Install the radio tuner opening cover with bracket with the 4 bolts <B>.

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)


    1. A00425U

      Engage the 4 claws to install the center instrument cluster finish panel sub-assembly.

  10. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A0040N0

      Connect the connector.

    2. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.

  11. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 14 claws to install the instrument cluster finish panel garnish.

  12. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A0040B6

      Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.

  13. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A004159

      Connect each connector.

    2. Engage the 6 claws to install the integration control and panel assembly.

  14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  15. INSTALL REAR NO. 3 FLOOR BOARD UPPER PLATE


    1. Engage the 2 claws to install the rear No. 3 floor board upper plate.

  16. INSTALL DECK FLOOR BOX RH


    1. Install the deck floor box RH Click here.

    2. Install the rear No. 2 floor board.

  17. INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.