FRONT SEATBACK HEATER (for Power Seat) INSTALLATION


  1. INSTALL FRONT SEATBACK HEATER ASSEMBLY (SEPARATE TYPE FRONT SEATBACK COVER)


    1. A00417BE01
      Text in Illustration
      *1 Fastening Rubber
      *2 Hog Ring

      Using hog ring pliers, connect the fastening rubber to the separate type front seatback pad with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A0040D9

      Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 5 new hog rings

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad to the front seatback spring sub-assembly.

    2. A0040D7

      Engage the 4 claws and install the 2 front seat headrest supports.

    3. A0043SH

      Install the separate type front seatback cover bracket with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.

      • Check that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    4. A0040T2

      Engage the 2 hooks.

    5. A0042F8E01
      Text in Illustration
      *1 Fastening Rubber

      Using hog ring pliers, install the fastening rubber to the front seatback spring with 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    6. A0042ET

      Close the 2 fasteners.

    7. A0042G6

      Push in the lower part of 2 fasteners to the separate type front seatback cover as shown in the illustration.

    8. A0040FL

      Using hog ring pliers, install 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    9. A0040FF

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here