LUMBAR SWITCH (for Manual Seat) INSPECTION


  1. INSPECT POWER SEAT SWITCH ASSEMBLY (for LHD)


    1. A0043MKE20
      Text in Illustration
      *1 Hold
      *2 Release
      *a

      Component without harness connected

      (Power Seat Switch Assembly (for LHD))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      1 - 2

      1 - 3

      3 - 4

      4 - 5

      		 Hold Below 1 Ω

      1 - 2

      4 - 5

      		 Off Below 1 Ω

      1 - 2

      1 - 3

      3 - 4

      4 - 5

      		 Release 10 kΩ or higher

      If the result is not as specified, replace the power seat switch assembly (for LHD).

  2. INSPECT POWER SEAT SWITCH ASSEMBLY (for RHD)


    1. A0041FME05
      Text in Illustration
      *1 Hold
      *2 Release
      *a

      Component without harness connected

      (Power Seat Switch Assembly (for RHD))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      1 - 2

      1 - 3

      3 - 4

      4 - 5

      		 Hold Below 1 Ω

      1 - 2

      4 - 5

      		 Off Below 1 Ω

      1 - 2

      1 - 3

      3 - 4

      4 - 5

      		 Release 10 kΩ or higher

      If the result is not as specified, replace the power seat switch assembly (for RHD).