REAR SEAT ASSEMBLY INSTALLATION


  1. INSTALL REAR SEATBACK ASSEMBLY LH


    1. Place the rear seatback assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly LH with the 2 bolts.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

    3. Engage the 3 fasteners.

  2. INSTALL REAR SEATBACK ASSEMBLY RH


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly RH with the 2 bolts.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

    3. Engage the 3 fasteners.

  3. CONNECT REAR CENTER SEAT BELT ASSEMBLY


    1. A00421ME01
      Text in Illustration
      *1 Protruding Part

      Connect the anchor part of the rear center seat belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat belt assembly to overlap the protruding part of the rear seat inner belt assembly RH.

  4. INSTALL REAR SIDE SEATBACK ASSEMBLY LH


    1. A0040RH

      Engage the 2 guides as shown in the illustration.

    2. Engage the 3 fasteners.

    3. Install the rear side seatback assembly LH with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  5. INSTALL REAR SIDE SEATBACK ASSEMBLY RH


    1. A0043VX

      Engage the 2 guides as shown in the illustration.

    2. Engage the 3 fasteners.

    3. Install the rear side seatback assembly RH with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  6. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. A0040UY

      Engage the 2 claws to install the rear seat cushion lock hook.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  7. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. Place the rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A0042WJE01
      Text in Illustration
      *1 Rear Hook
      *2 Front Hook

      Engage the 2 rear hooks of the rear seat cushion assembly to the rear seatback assembly.

    3. Engage the 2 front hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.

    4. Confirm that the rear seat cushion assembly is firmly installed.

      Note

      When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.

  8. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

  9. INSTALL REAR SEAT HEADREST ASSEMBLY LH

  10. INSTALL REAR SEAT HEADREST ASSEMBLY RH