FRONT SEAT ASSEMBLY (for Power Seat) REASSEMBLY


  1. INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. Engage the 4 guides.

      A0042DR

    2. Install the separate type front seatback spring assembly to the separate type front seat cushion spring assembly with the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH


    1. A0040LC

      Engage the 2 guides to install the front seat cushion edge protector RH to the separate type front seatback spring assembly.

    2. Install the screw.

  3. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL FRONT LOWER SEAT CUSHION SHIELD RH


    1. A0042A3

      Engage the clip to install the front lower seat cushion shield RH to the separate type front seat cushion spring assembly.

    2. Install the screw.

    3. A0042D8

      Engage the hook as shown in the illustration.

  5. INSTALL FRONT LOWER SEAT CUSHION SHIELD LH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    1. A0040J9

      Engage the 2 guides to install the reclining adjuster inside cover LH to the separate type front seatback spring assembly.

  7. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

  8. INSTALL FRONT NO. 2 SEAT WIRE


    1. A0042FU

      Engage the 3 clamps to install the front No. 2 seat wire to the separate type front seatback spring assembly.

    2. Connect the 2 connectors.

  9. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. A00417BE01
      Text in Illustration
      *1 Fastening Rubber
      *2 Hog Ring

      Using hog ring pliers, connect the fastening rubber to the separate type front seatback pad with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A0040D9

      Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 5 new hog rings

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  10. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad to the front seatback spring sub-assembly.

    2. A0040D7

      Engage the 4 claws and install the 2 front seat headrest supports.

    3. A0043SH

      Install the separate type front seatback cover bracket with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with side airbags, the side airbags may not be activated normally unless the front seatback cover is securely installed.

      • Check that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    4. A0040T2

      Engage the 2 hooks.

    5. A0042F8E01
      Text in Illustration
      *1 Fastening Rubber

      Using hog ring pliers, install the fastening rubber to the front seatback spring with 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    6. A0042ET

      Close the 2 fasteners.

    7. A0042G6

      Push in the lower part of 2 fasteners to the separate type front seatback cover as shown in the illustration.

    8. A0040FL

      Using hog ring pliers, install 3 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    9. A0040FF

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  11. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A0041DB

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 11 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A0041CC

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  12. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Engage each hook to install the separate type front seat cushion cover with pad to the front seat cushion spring sub-assembly as shown in the illustration.

      A0042C7
    2. A0042W5

      Engage the 2 hooks as shown in the illustration.

    3. A0042WE

      Engage the fastener to connect the side airbag wire harness.

    4. Connect the connector and engage the clamp to connect the seat heater wire harness.

    5. A0043TA

      Engage the 3 clamps to connect the seat heater wire harness.

    6. A0041VA

      Engage the 4 hooks.

    7. A00442C

      Connect the rubber band.

  13. INSTALL FRONT INNER SEAT CUSHION SHIELD


    1. A0040UC

      Engage the 5 claws and install the front inner seat cushion shield.

  14. INSTALL FRONT SEAT WIRE


    1. A003ZWRE01
      Text in Illustration
      *1 Clamp
      *2 Hook

      Engage the 3 claws to close the wire harness cover as shown in the illustration.

    2. Engage the clamp and hook to install the front seat wire to the front seat cushion shield.

  15. INSTALL LUMBAR SWITCH (POWER SEAT SWITCH ASSEMBLY)


    1. Engage the 4 claws to install the lumbar switch (power seat switch assembly).

  16. INSTALL FRONT POWER SEAT SWITCH


    1. Install the front power seat switch with the 3 screws.

  17. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A0040MQ

      Engage the 4 claws to install the reclining power seat switch knob.

  18. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A0042S1

      Engage the 4 claws to install the slide and vertical power seat switch knob.

  19. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A00402XE01
      Text in Illustration
      *1 Clamp
      *2 Hook

      Connect the 2 connectors.

    2. Engage the clamp and hook as shown in the illustration.

    3. A00445L

      Engage the guide and 4 claws as shown in the illustration.

    4. Engage the clip to install the front seat cushion shield assembly.

    5. A0040FS

      Engage the 6 clamps.

    6. Connect the 4 connectors.

  20. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A0040G7

      Engage the 2 claws and clip.

    2. Engage the guide to install the front inner No. 1 seat cushion shield to the front seat cushion shield with the screw.

  21. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A00446FE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage each clamp under the front seat assembly.

  22. INSTALL SEAT ADJUSTER COVER CAP


    1. A004223

      Install the seat adjuster cover cap.

      Tech Tips

      Use the same procedure for the LH side and RH side.