FRONT SEAT ASSEMBLY (for Power Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A004223

      Remove the seat adjuster cover cap.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disengage each clamp under the front seat assembly.

    2. A0043FJ

      Remove the nut and front seat inner belt assembly.

  3. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A0040G7

      Remove the screw.

    2. Disengage the guide, 2 claws and clip, and remove the front inner No. 1 seat cushion shield.

  4. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A0040FS

      Disconnect the 4 connectors.

    2. Disengage the 6 clamps and disconnect the No. 1 front seat wire.

    3. A00410C

      Disengage the clip.

    4. Disengage the 4 claws and guide, and disconnect the front seat cushion shield assembly as shown in the illustration.

    5. A0040Q9E01
      Text in Illustration
      *1 Clamp
      *2 Hook

      Disconnect the 2 connectors.

    6. Disengage the clamp and hook, and remove the front seat cushion shield assembly as shown in the illustration.

  5. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A0041K4

      Using a moulding remover, disengage the 4 claws and remove the slide and vertical power seat switch knob.

  6. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A00400T

      Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.

  7. REMOVE FRONT POWER SEAT SWITCH


    1. A004409

      Remove the 3 screws and front power seat switch.

  8. REMOVE LUMBAR SWITCH (POWER SEAT SWITCH ASSEMBLY)


    1. A0043W2

      Disengage the 4 claws and remove the lumbar switch (power seat switch assembly).

  9. REMOVE FRONT SEAT WIRE


    1. A004250E01
      Text in Illustration
      *1 Clamp
      *2 Hook

      Disengage the 3 claws and open the wire harness cover as shown in the illustration.

    2. Disengage the clamp and hook, and remove the front seat wire from the front seat cushion shield

  10. REMOVE FRONT INNER SEAT CUSHION SHIELD


    1. A0040UC

      Disengage the 5 claws and remove the front inner seat cushion shield.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A00442C

      Disconnect the rubber band.

    2. A0041VA

      Disengage the 4 hooks.

    3. A0043TA

      Disengage the 3 clamps and disconnect the seat heater wire harness.

    4. A0042B6

      Disconnect the connector.

    5. Disengage the clamp and disconnect the seat heater wire harness.

    6. Disengage the fastener and disconnect the side airbag wire harness.

    7. A00432G

      Disengage the 2 hooks as shown in the illustration.

    8. Disengage each hook and remove the separate type front seat cushion cover with pad from the front seat cushion spring sub-assembly as shown in the illustration.

      A0043NC

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A0042VA

      Remove the 2 hog rings

    2. A0042OG

      Remove the 11 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A0041I0

      remove the 2 hog rings.

    2. A0042MV

      Remove the 3 hog rings.

    3. A00449K

      Pull out the lower part of 2 fasteners from the separate type front seatback cover as shown in the illustration.

    4. A00432N

      Open the 2 fasteners.

    5. A00408TE01
      Text in Illustration
      *1 Fastening Rubber

      Remove the 3 hog rings and disconnect the 2 fastening rubbers.

    6. A0040T2

      Disengage the 2 hooks.

    7. A0043SH

      Turn back the separate type front seatback cover to remove the nut, and separate the bracket of the separate type front seatback cover.

    8. A0040D7

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    9. Remove the separate type front seatback cover with pad from the separate type front seatback spring assembly.

  14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A00400Z

      Remove the 5 hog rings.

    2. A0042TVE01
      Text in Illustration
      *1 Fastening Rubber
      *2 Hog Ring

      Remove the 2 hog rings and the separate type front seatback cover from the separate type front seatback pad.

  15. REMOVE FRONT NO. 2 SEAT WIRE


    1. A0042FU

      Disconnect the 2 connectors.

    2. Disengage the 3 clamps and remove the front No. 2 seat wire from the separate type front seatback spring assembly.

  16. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A003ZYM

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  17. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A0040J9

      Disengage the 2 guides and remove the reclining adjuster inside cover LH.

  18. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH


    1. A00443J

      Disengage the hook as shown in the illustration.

    2. A0042A3

      Remove the screw.

    3. Disengage the clip and remove the front lower seat cushion shield RH.

  19. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH

    Tech Tips

    Use the same procedure described for the LH side.

  20. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH


    1. A0040LC

      Remove the screw.

    2. Disengage the 2 guides and remove the front seat cushion edge protector RH.

  21. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. Remove the 4 bolts.

      A0042DR

    2. Disengage the 4 guides and remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.