FRONT SEAT CUSHION HEATER (for Power Seat) INSTALLATION


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (SEPARATE TYPE FRONT SEAT CUSHION COVER)


    1. A0041DB

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 11 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A0041CC

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Engage each hook to install the separate type front seat cushion cover with pad to the front seat cushion spring sub-assembly as shown in the illustration.

      A0042C7
    2. A0042W5

      Engage the 2 hooks as shown in the illustration.

    3. A0042WE

      Engage the fastener to connect the side airbag wire harness.

    4. Connect the connector and engage the clamp to connect the seat heater wire harness.

    5. A0043TA

      Engage the 3 clamps to connect the seat heater wire harness.

    6. A0041VA

      Engage the 4 hooks.

    7. A00442C

      Connect the rubber band.

  3. INSTALL FRONT INNER SEAT CUSHION SHIELD


    1. A0040UC

      Engage the 5 claws and install the front inner seat cushion shield.

  4. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A00402XE01
      Text in Illustration
      *1 Clamp
      *2 Hook

      Connect the 2 connectors.

    2. Engage the clamp and hook as shown in the illustration.

    3. A00445L

      Engage the guide and 4 claws as shown in the illustration.

    4. Engage the clip to install the front seat cushion shield assembly.

    5. A0040FS

      Engage the 6 clamps.

    6. Connect the 4 connectors.

  5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A0040G7

      Engage the 2 claws and clip.

    2. Engage the guide to install the front inner No. 1 seat cushion shield to the front seat cushion shield with the screw.

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A00446FE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage each clamp under the front seat assembly.

  7. INSTALL FRONT SEAT ASSEMBLY

    Click here