FRONT SEAT CUSHION HEATER (for Manual Seat) INSTALLATION


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (SEPARATE TYPE FRONT SEAT CUSHION COVER)


    1. A0041DB

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 11 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A0041CC

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Engage each hook to install the separate type front seat cushion cover with pad to the separate type front seat cushion spring assembly as shown in the illustration.

      A0040EA
    2. A0040MA

      Engage the 2 hooks as shown in the illustration.

    3. for Front Passenger Side:


      1. A00434Z

        Engage the hook to connect the belt warning occupant detection sensor connector.

    4. A00407G

      Engage the fastener to connect the front seat airbag assembly wire harness.

    5. A0041K6

      Engage the clamp to connect the seat heater wire harness.

    6. Connect the seat heater connector.

    7. A004185

      Engage the 4 clamps to connect the seat heater wire harness.

    8. A0040AY

      Engage the 4 hooks.

    9. A0040K0

      Connect the rubber band.

  3. INSTALL FRONT INNER SEAT CUSHION SHIELD


    1. A0041QB

      Engage the 5 claws to install the front inner seat cushion shield.

  4. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. A00446FE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage each clamp under the front seat assembly.

  5. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A0040MEE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage each clamp under the front seat assembly.

    3. Connect the connector under the front seat assembly.

  6. INSTALL FRONT SEAT CUSHION SHIELD


    1. A004474

      Engage the clip and 6 claws to install the front seat cushion shield.

    2. Install the screw.

  7. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side)


    1. A0042AK

      Install the vertical adjusting handle with the screw.

  8. INSTALL RECLINING ADJUSTER RELEASE HANDLE


    1. A0040TM

      Engage the claw to install the reclining adjuster release handle.

  9. INSTALL FRONT SEAT ASSEMBLY

    Click here