FRONT SEAT CUSHION HEATER (for Manual Seat) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. A0040JYE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

  3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    1. A0042AK

      Remove the screw and vertical adjusting handle.

  4. REMOVE FRONT SEAT CUSHION SHIELD


    1. A00446W

      Remove the screw.

    2. Disengage the 6 claws and clip, and remove the front seat cushion shield.

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disengage each clamp under the front seat assembly.

    2. A0043FJ

      Remove the nut and front seat inner belt assembly.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. Disconnect the connector under the front seat assembly.

    2. Disengage each clamp under the front seat assembly.

    3. A0040OV

      Remove the nut and front seat inner belt assembly.

  7. REMOVE FRONT INNER SEAT CUSHION SHIELD


    1. A0041QB

      Disengage the 5 claws and remove the front inner seat cushion shield.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A0040K0

      Disconnect the rubber band.

    2. A0040AY

      Disengage the 4 hooks.

    3. A0041BK

      Disengage the 4 clamps and disconnect the seat heater wire harness.

    4. A0041K6

      Disconnect the seat heater connector.

    5. Disengage the clamp and disconnect the seat heater wire harness.

    6. A00407G

      Disengage the fastener and disconnect the front seat airbag assembly wire harness.

    7. for Front Passenger Side:


      1. A00434Z

        Disengage the hook and disconnect the belt warning occupant detection sensor connector.

    8. A0041DK

      Disengage the 2 hooks as shown in the illustration.

    9. Disengage each hook and remove the separate type front seat cushion cover with pad from the separate type front seat cushion spring assembly as shown in the illustration.

      A004156

  9. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (SEPARATE TYPE FRONT SEAT CUSHION COVER)


    1. A0042VA

      Remove the 2 hog rings.

    2. A0042OG

      Remove the 11 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.